|
|
|
|
Installation
Preliminary note
Our mirrors are easy to mount. However, we recommend you have the mirror installed by authorized personnel only.
Before mounting and while being installed, the mirror should be put on soft surface.
Do not remove the protection film before the installation is complete.
Installation
- The metal profile you find enclosed is designed to mount the mirror. Put the profile horizontally against the wall and adjust it with a water-level.
- The drill holes in the profile mark the points where you will later fix the profile. Mark both of these holes with a marker.
- Drill the two holes and put the wallplugs inside.
- Now you put the metal mounting at the wall and fix it with two screws. Make sure that you attach it securely.
- Disconnect the power supply and then connect the mirror.
- For better fixing of big mirrors, we have enclosed the delivery a magnet.. Attach this magnet to the wall, nearby the lower edge of the mirror (screw and wallplug are enclosed).
- On the backside of the mirror, you find another metal profile for mounting. Now you put this one onto the one you have fixed at the wall. In case the mirror is very big, softly push its bottom edge towards the magnet.
- Remove the protection film.
- Only now you re-connect the power-supply.
|
|
